http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/CommentRSS/1/Default.aspx en-us Copyright 2009 System Center Central All Rights Reserved. Thu, 24 May 2012 02:58:38 GMT Mon, 13 Feb 2012 11:41:46 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-1592


Can this be used with SNMP V1?]]> Tue, 31 Aug 2010 00:35:06 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-891


re-writing the MP for SP1 is not really an option since the procedures used are specific for R2 like multiple SNMP get retrieval. (as I remember correctly).



You might be able to get something similar but this would require using WMI and SNMP. Which is a total different approach.

Based on this I have no intention to release or re-write a free SP1 version... Sorry.



If you want the functionality of this free mp you need R2.



If you are intrested in a commercial one I am able to give you the information for a NetApp Management Pack for SP1 but this version is not free for usage. If you are intrested please send me a PM.



regards,

Oskar Landman]]> Mon, 30 Aug 2010 09:00:19 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-890


Is it possible to re-write this MP for SCOM 2007 SP1?]]> Wed, 25 Aug 2010 07:32:49 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-879


to be honest I can't tell for both but, the management pack I designed uses SNMP so it can be....

It really depends on the device if it can be defined by the OID 1.3.6.1.4.1.789 it will probably work.But if it uses an IBM OID it will not be discovered so no harm done....you can test if it works or not.



Otherwise you will need the MIB file for your device and change the MP...

Maybe NetApp's MP works for you but can't be sure it depends on the software running on your SAN.

Unfortunately I can't give you a clear awnser, you need to ask NetApp if they support your device.......

regards,

Oskar]]> Fri, 16 Apr 2010 16:39:17 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-622


We are in the process of setting up a SCOM Monitoring environment and would like to monitor our SAN which is a branded NetApp SAN from IBM named nSeries.

Do you know if the standard management pack from NetApp supports branded NetApp SANs?

The other question is that if the management pack you made support branded NetApp SANs?



Best regards

Hans Chr. Andersen]]> Thu, 15 Apr 2010 10:45:58 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-619 Tue, 30 Mar 2010 22:28:23 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-585 Fri, 19 Mar 2010 14:33:18 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-568 Tue, 16 Mar 2010 08:49:10 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-549


BTW..... thank you for doing this. Your guide to actually creating this MP was great!]]> Mon, 15 Mar 2010 17:30:18 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-545
I will look further in to the details.



Regards, Kees]]> Mon, 15 Mar 2010 08:36:36 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-543 Sun, 14 Mar 2010 12:23:54 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-541 Fri, 12 Mar 2010 20:47:35 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-538
Will run some tests tomorrow. And if everything runs ok will post an updated version which will include the fix and possibly some reports.



Regards,

Oskar]]> Thu, 11 Mar 2010 21:34:02 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-536 Thu, 11 Mar 2010 08:40:06 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-533
Will post an update to the MP in the next 2 days. I am currently looking into this issue it looks like there is an error in the mp for volume discovery.

I will test this probably tonight and post the update version. Sorry for the inconvenience,

]]> Wed, 10 Mar 2010 09:06:00 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-527 Tue, 09 Mar 2010 21:15:13 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-525 Thu, 18 Feb 2010 15:24:49 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-484
Wait for 24 hours for the roles to populate.

Also I did get some feedback on the volume discovery which I will look into tomorrow.

]]> Thu, 18 Feb 2010 14:56:07 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-482


I discover my two NetApp machines with the Network Device Discovery Wizard. The look fine and healthy.



I then import your MP (the sealed one) and after an hour, nothing happens (no roles get populated).



Is there any specific configuration needed? I could not find any documentation.



Thanks in advance!]]> Thu, 18 Feb 2010 14:36:45 GMT http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/indexId/58922/Default.aspx#comment-481